DIN Ck30/1.1178 Engineering steel
Port: Hu nan
Ck30 engineering steel, Ck30 alloy tool steel, Ck30 alloy steel, Ck30 alloy structural steel
Alloy Structural Steel, Alloy Tool Steel, Carbon Structural Steel, Carbon Tool Steel, Bearing Steel, Spring Steel ,Stainless Steel, Refractory Steel, Roll Steel, Pinion Steel. Additionally, the company also has the capacity to forge round steel, steel flat, square steel, module, shaft and roller
1: Ck30 steel introduction
Ck30 is special steel, and is low temperature of Structural steel in Germany.Structural steel is to point to a specific strength and formability of grades of steel.Formability expressed as a percentage elongation after interruption of tensile test.Structural steel, generally for hosting purposes, in the strength of these USES of sinosteel is an important design criteria.
2: Ck30 steel equivalent
| Country | China | Japan | Germany | USA |
| Standard | GB/T | JIS |
DIN (W-Nr.) DIN 17200 |
AISI/ASTM |
| Grade |
|
|
Ck30 |
|
3: Ck30 steel chemical composition
| Grade | C | Si | Mn | P | S |
| Ck30 | 0.27-0.34 | 0.40 | 0.50-0.80 | 0.035 | 0.03 |
4: Ck30 steel mechanical properties
The mechanical properties mainly include tensile strength, yield strength, elongation, area or reduction, hardness, impact value, non-metalic inclusion etc. Different heat treatment, the mechanical properties will be different, such as normalized, tempered, QT. If you want to know the properties, kindly contact the salesman.
5: Ck30 steel overviews
| Size | Round | Dia 6-1200mm |
| Plate/Flat/Block |
Thickness 6mm-500mm |
|
|
Width 20mm-1000mm |
||
| Heat treatment | Normalized ; Annealed ; Quenched ; Tempered | |
| Surface condition | Black; Peeled; Polished; Machined; Grinded; Turned; Milled | |
| Delivery condition | Forged; Hot rolled; Cold drawn | |
| Test | Tensile strength, Yield strength, elongation, area of reduction, impact value, hardness, grain size, ultrasonic test, US inspection, magnetic particle testing, etc. | |
| Payment terms | T/T;L/C;/Money gram/ Paypal | |
| Trade terms | FOB; CIF; C&F; etc.. | |
| Delivery time | 30-45 days | |
| Application | Ck30 is used for semi-finished products such as bloom, flat steel, bar stock. Hot rolled steel wire; hot rolled or forged steel bars such as round, square, hexagonal, octagonal and flat steel-hot rolled wide strip; hot rolled or cold rolled steel plates and strips; free forging and die forging. | |
6: Delivery condition
For hot forged bar, usually the delivery condition is hot forged, annealed/QT, rough turned/Black surface.
For hot rolled bar, usually the delivery condition is hot rolled, annealed/QT, Black surface.
For hot forged block, usually the delivery condition is hot forged, annealed/QT, milled surface/Black surface
For hot rolled plate, usually the delivery condition is hot rolled, annealed/QT, black surface.
For cold drawn bar, usually the delivery condition is cold drawn, annealed/QT, peeled/black surface
