DIN 28Mn6/1.1170 Engineering steel
Port: Hu nan
28Mn6 engineering steel, 28Mn6 alloy tool steel, 28Mn6 alloy steel, 28Mn6 alloy structural steel
Alloy Structural Steel, Alloy Tool Steel, Carbon Structural Steel, Carbon Tool Steel, Bearing Steel, Spring Steel ,Stainless Steel, Refractory Steel, Roll Steel, Pinion Steel. Additionally, the company also has the capacity to forge round steel, steel flat, square steel, module, shaft and roller
1: 28Mn6 steel introduction
28Mn6 steel has high hardenability and small quenching deformation, but it has overheat, decarburization sensitivity and temper brittleness. Its plasticity during cold deformation is medium, machinability and weldability are acceptable, but the material needs to be preheated to above 200℃ before welding. After quenching and tempering, 28Mn6 steel has high strength, toughness and wear resistance, good static strength and fatigue strength.
2: 28Mn6 steel equivalent
| Country | China | Japan | Germany | USA |
| Standard | GB/T | JIS |
DIN (W-Nr.) DIN 17200 |
AISI/ASTM |
| Grade |
|
|
28Mn6 |
|
3: 28Mn6 steel chemical composition
| Grade | C | Si | Mn | P | S |
| 28Mn6 | 0.25-0.32 | 0.40 | 1.30-1.65 | 0.035 |
0.03 |
4: 28Mn6 steel mechanical properties
The mechanical properties mainly include tensile strength, yield strength, elongation, area or reduction, hardness, impact value, non-metalic inclusion etc. Different heat treatment, the mechanical properties will be different, such as normalized, tempered, QT. If you want to know the properties, kindly contact the salesman.
5: 28Mn6 steel overviews
| Size | Round | Dia 6-1200mm |
| Plate/Flat/Block |
Thickness 6mm-500mm |
|
|
Width 20mm-1000mm |
||
| Heat treatment | Normalized ; Annealed ; Quenched ; Tempered | |
| Surface condition | Black; Peeled; Polished; Machined; Grinded; Turned; Milled | |
| Delivery condition | Forged; Hot rolled; Cold drawn | |
| Test | Tensile strength, Yield strength, elongation, area of reduction, impact value, hardness, grain size, ultrasonic test, US inspection, magnetic particle testing, etc. | |
| Payment terms | T/T;L/C;/Money gram/ Paypal | |
| Trade terms | FOB; CIF; C&F; etc.. | |
| Delivery time | 30-45 days | |
| Application | 28Mn6 is commonly used as an important fastener of small section, as well as frame beam, gearbox gear, shaft, cold heading bolt and quenching and tempering parts of large section. In addition, 28Mn6 steel can also be used as carburized steel to make carburized parts with higher requirements for core strength, such as rear axle and journal of mine crane. | |
6: Delivery condition
For hot forged bar, usually the delivery condition is hot forged, annealed/QT, rough turned/Black surface.
For hot rolled bar, usually the delivery condition is hot rolled, annealed/QT, Black surface.
For hot forged block, usually the delivery condition is hot forged, annealed/QT, milled surface/Black surface
For hot rolled plate, usually the delivery condition is hot rolled, annealed/QT, black surface.
For cold drawn bar, usually the delivery condition is cold drawn, annealed/QT, peeled/black surface
