GB 30Cr3Ni3Mo | JIS SNCM630 Engineering steel
Port: Hu nan
SNCM630 engineering steel, SNCM630 alloy tool steel, SNCM630 alloy steel, SNCM630 alloy structural steel, 30Cr3Ni3Mo engineering steel
Alloy Structural Steel, Alloy Tool Steel, Carbon Structural Steel, Carbon Tool Steel, Bearing Steel, Spring Steel ,Stainless Steel, Refractory Steel, Roll Steel, Pinion Steel. Additionally, the company also has the capacity to forge round steel, steel flat, square steel, module, shaft and roller
1: SNCM630 steel introduction
SNCM 630 steel is an alloy steel in JIS G 4103. It contains nearly 3% Ni, 3% Cr and a small amount of 0.5% Mo. It belongs to Ni-Cr-Mo series steel. SNCM630 steel is generally delivered in annealed condition.
2: SNCM630 steel equivalent
| Country | China | Japan | Germany | USA |
| Standard | GB/T | JIS G4103 |
DIN (W-Nr.) |
AISI/ASTM |
| Grade |
30Cr3Ni3Mo |
SNCM630 |
|
|
3: SNCM630 steel chemical composition
| Grade | C | Si | Mn | P | S | Cr | Mo | Ni |
| SNCM630 | 0.25-0.35 | 0.15-0.35 | 0.35-0.60 | 0.03 |
0.03 |
2.50-3.50 |
0.50-0.70 | 2.50-3.50 |
4: SNCM630 steel mechanical properties
The mechanical properties mainly include tensile strength, yield strength, elongation, area or reduction, hardness, impact value, non-metalic inclusion etc. Different heat treatment, the mechanical properties will be different, such as normalized, tempered, QT. If you want to know the properties, kindly contact the salesman.
5: SNCM630 steel overviews
| Size | Round | Dia 6-1200mm |
| Plate/Flat/Block |
Thickness 6mm-500mm |
|
|
Width 20mm-1000mm |
||
| Heat treatment | Normalized ; Annealed ; Quenched ; Tempered | |
| Surface condition | Black; Peeled; Polished; Machined; Grinded; Turned; Milled | |
| Delivery condition | Forged; Hot rolled; Cold drawn | |
| Test | Tensile strength, Yield strength, elongation, area of reduction, impact value, hardness, grain size, ultrasonic test, US inspection, magnetic particle testing, etc. | |
| Payment terms | T/T;L/C;/Money gram/ Paypal | |
| Trade terms | FOB; CIF; C&F; etc.. | |
| Delivery time | 30-45 days | |
| Application | SNCM 630 is mainly used for mechanical structural steel, which is made by hot rolling, forging and other hot forming methods, and is usually used after further forging. | |
6: Heat Treatment
Annealing
Heat the steel to the temperaure 830-870℃, and enough soaking time for the steel heating, Cool slowly in the furnace with hardness below 269HBW.
Quenching
Quenching temperature is carried out from an austenitizing temperature of 850-900℃ with several heating steps,keep suitable time for the steel to be thoroughly heated, oil quenching is recommended.
Tempering
Tempering process should be followed after quenching immediately.Tempering at a suitable temperature 550-650℃ .
7: Delivery condition
For hot forged bar, usually the delivery condition is hot forged, annealed/QT, rough turned/Black surface.
For hot rolled bar, usually the delivery condition is hot rolled, annealed/QT, Black surface.
For hot forged block, usually the delivery condition is hot forged, annealed/QT, milled surface/Black surface
For hot rolled plate, usually the delivery condition is hot rolled, annealed/QT, black surface.
For cold drawn bar, usually the delivery condition is cold drawn, annealed/QT, peeled/black surface
